← vanagon.com home · Continue the discussion in the forum
VanagonEuroVan
Sort by authorSort by posting dateSort by topicChronological orderMost recent firstShow authorHide authorShow table of contentsHide table of contentsBack to main VANAGON pageJoin or leave VANAGONSearch
Subject:Re: First Timer - Dash Removal, heater R&R
From:Neil N <musomuso@GMAIL.COM>
Date:Sun, 8 Nov 2020 11:10:24 -0800

Oops. Didn't post to the list.

On 11/8/20, Neil N <musomuso@gmail.com> wrote:

> If doing the job by yourself, one challenge is to not bump, hit, the
> brake fluid reservoir as you lift, re install, dash.
>
> With two people, one more experienced than I, we removed a dash in
> less than 10 minutes.
>
> If one removes/installs the dash by themselves, maybe lift pass side
> end, secure it to grab bar (or?), lift other end of dash up and over
> the brake fluid reservoir?
>
> I'd have to confirm this but AFAIK, the residential type foam I
> installed in 2008 on some custom foot heat control flaps has not
> deteriorated or fallen off, yet. image of modified "air cooled engine"
> heat box: https://sites.google.com/site/tubaneil2/HeaterFlapMod.jpg
> Not the same test as having the same foam near hot air from the heater
> core though.
>
> I applied sealant to the exterior of box half joint.
>
> Make sure you have room to keep the doors open when it comes time for the
> job.
>
> Neil.
>
> On 11/7/20, Steve Williams <steve@williamsitconsulting.com> wrote:
>
>> Hi,
>>
>> I want to replace my front heater motor and the heater core.
>>
>> I've got a good video on removing the dash and it doesn't look that
>> terrible.
>> https://m.youtube.com/watch?v=KF66MnKOmbE&noapp=1
>>
>> How long would you estimate it takes to do it the first time?  lol
>>
>> I'm used to working on my van, wheel bearings, installing Propex &
>> Lithium battery and various upgrades.
>>
>> I used to be scared to take my fridge out, but now I can do it in 20
>> minutes with 0 stress :D
>>
>> I've got the clips to put the heater box back together, but I was
>> wondering what people have used to seal the flaps inside the heater.  I
>> don't actually know what it looks like in there.
>>
>> Thanks,
>> Steve Williams
>>
>
>
> --
> Neil n
>
> VE7TBN
>
> 1988 Westy 50º ABA swap: https://tinyurl.com/yap5hpwt
>
> 1981 Westy 15º ABA swap: https://tinyurl.com/y9n4xob8
>
> VAG Gas Engine Swap Group <http://tinyurl.com/khalbay>
>

-- 
Neil n

VE7TBN

1988 Westy 50º ABA swap: https://tinyurl.com/yap5hpwt

1981 Westy 15º ABA swap: https://tinyurl.com/y9n4xob8

VAG Gas Engine Swap Group <http://tinyurl.com/khalbay>

← Previous in thread
Back to November 2020, week 2
Have something to add on this topic today? Revive this thread in the forum »