← vanagon.com home · Continue the discussion in the forum
VanagonEuroVan
Sort by authorSort by posting dateSort by topicChronological orderMost recent firstShow authorHide authorShow table of contentsHide table of contentsBack to main VANAGON pageJoin or leave VANAGONSearch
Subject:Fuel injection trouble
From:TJ Hemrick <x53gunner@GMAIL.COM>
Date:Mon, 28 Sep 2009 08:24:56 -0400

I'm not getting any fuel out of the injectors but definitely have good
clean fuel in the lines.  I had some help and found the injectors were
getting voltage but it's incredibly low.  It peaks at 4 volts and within two
revolutions, it holds at 2-3 volts max.  I have NO idea what could cause
that or what to check next.  I checked the relays and they are getting
proper power where they should and have ground where they should.  I checked
all the wire grounds, as many connections as I could find, swapped out the
two relays in the engine compartment, and swapped another ECU just for
giggles (no change).  I've never had any problem like this (low voltage).
It's either been a bad wire (no voltage/short) or bad a component.  Anyone
have something similar or ideas on what or where to look next?

TJ

87 GL

Next in thread →
Back to September 2009, week 4
Have something to add on this topic today? Revive this thread in the forum »