Ed,

Great descrption of how to do it right...with the right tools.

So, anyone have any suggestions on how to get a drum off that's stuck to
the hub/axle? I've not spent too much time, but I have soaked it with Aero
Kroil, and pounded it with a rubber mallet. I also tried gently heating
the area around the hub (where it is apparantly stuck) with a propane
torch.

I've only spent a few mintutes doing the above things, so maybe more time
would be productive.

I can't see any good way to use a large puller. The backing plate would
have to be bent to get the hooks around the drum.

Suggestions?

Thanks,

Jon

> The total height of this socket is 2-5/8" so the offset is ideal to allow
> for a straight pull on an cheater pipe that just clears the Vanagon fender.
>  No additional support is required to keep the socket from twisting off the
> nut.  When I have used the stamped steel hammer wrench and stood on the
> breaker bar/cheater bar the crude wrench quickly twisted off of the nut,
> resulting in rounding off the corners of the nut and deforming the gripping
> surfaces of the "wrench".